Designing your cellar control system
In order to design your fermentation/cellar control system you will need the following:
Fermentation Control panel
- Glycol Chiller
- One type K Thermocouple for each tank
- Thermocouple extension wire (must use type K thermocouple wire)
- One normally closed solenoid valve for each tank to be controlled
- One normally open solenoid valve for each cooling loop (it is most common to only have one cooling loop)
- One 15 psi pressure relief valve
- Two check valves
The following drawing can help you better understand the layout
Contact us for assistance with your design.